Manual
  • Fusion Splicer Manual
  • Product Specification
  • Getting Started
    • Charging Battery
    • Start Splicing
  • Warnings and Precautions
  • Maintenance
    • Cleaning Device
    • Arc-Power Test
    • Replacing Electrodes
    • Battery Maintenance
  • Functions
    • Common Function
    • Parameter Set
      • Arc Parameter Set
      • Heat Parameter Set
    • System Debug
      • Sensor Status
      • Display Config-Auto
      • Display Config-Manual
      • Display Config-CCD
      • Display Config-LED
      • Dust Check
      • Motor Move Test
      • Motor Align Test
      • Motor Manual Test
    • Machine Info
      • View Record
      • Clear all records
      • Upload Record
      • Update Software
      • Update Firmware
    • Other Config
      • Function Setting
    • Quick Check
  • Troubleshooting
    • Fiber Displacement Adjust
Powered by GitBook
On this page
  1. Functions
  2. System Debug

Motor Align Test

PreviousMotor Move TestNextMotor Manual Test

Last updated 3 years ago

Function Introduction: For complete the automatic testing of the motor align.

Test steps (X, Y motor Align test) :

(1) Enter "System Debug" menu.

(2) Select “Motor Align Test”.

(4) Press the " up" to continue testing the x motor.

(5) The data as below is displayed after the motor align test of the x motor is completed.

(7) The data as below is displayed after the motor align test of the Y motor is completed.

(8) Done

(3) Press “Menu ” to enter the menu.

(6) Press “Exit” , re-enter step (3) , press the “Down” to test the Y motor.