Charging Battery

Introduction: The fusion splicer uses rechargeable lithium batteries. Using for extended periods of time in low battery status will damage the battery. Please recharge the battery from time to time. And the battery must be recharged once a month when not in use.

The requirements of battery charging temperature are：0℃ ~ 40℃

Steps:

1. Visual Inspection: Check the battery appearance - is it intact, with no damage? Check for bulging and leakage of liquid.

2. Check Current Power: Press the power indicator button to check the current power.

3. Insert Battery : Insert the battery into the fusion splicer.

4. Connect Adapter: Plug the adapter into the DC port of the fusion splicer. Check the display panel of battery. The battery indicator flickering indicates the battery is recharging (Note: If the battery has not been used for a long time, the battery will discharge. If the battery indicator is not flickering ,It will return to normal with 1 hour of charging)

5.Charging Completed: When the battery is fully charged, the battery indicator will stop flickering and all led of the battery indicator will light up, After 5 seconds turn it off.

6.Charging Confirmed: Press the battery indicator button, all led of the power indicator will light up.

7. Done